The interior would be one of the very last phases of the reassembly and the project.
The very last body part to be painted was the hood. The hood was painted last so that all the work that might need to be done in the engine compartment could be done without the hood in place and because the hood would not be bolted on until the very end of the work, […]
The hood had already been prepared, however the work wasn’t done to the same level as the truck was now being finished.
This page is to illustrate the location and routing of the headlight wiring harness.
This page illustrates the placement of the dual horns and voltage regulator.
This page illustrates the routing of the A/C receiver-drier and condenser hard lines.
This page illustrates the location of the windshield washer fluid reservoir on the driver-side fender.
This page illustrated the routing of the heater hoses from the engine to the heater core and back. From This C10 Links to Other C10s http://67-72chevytrucks.com/vboard/showthread.php?t=663479