Body and Trim Posted byc10editor August 30, 2019April 25, 2020 Doors are once again mounted back on the cab. Cargo lamp mounted and wired. Cargo lamp. Rear cab molding passenger side. Rear cab molding. Rear cab molding driver side. Mirros, door handles, and door locks. Bed is back on the frame – from back. Bed back on the frame -from front. Driver-side side molding, door glass, vent window, and gas cap. Driver-side bed moldings and marker light. Fully trimmed tailgate, trim, lights, bumper, license plate, etc. Tailgate close-up. Passenger-side side moldings, marker light, door glass and vent window. Driver-side fender mounted with moldings, emblems (minus engine call out) and marker light. Passenger-side fender mounted with emblems (minus engine call out) and marker light. New windshield is installed. Original back window is installed. NOS outer grill, NOS inner grill, reproduction grill emblem, and the grill mounting hardware kit. Closeup of the grill and emblem. Restored (media blasted, straightened tend, and painted) grill support brackets. Grill is mounted on the truck, note no headlight bezels yet. Straightened and re-chromed bumper and parking lights with NOS lenses in place. Headlights and parking lights on, electricity running through the wiring harnesses. Headlight bezels mounted in the outer grill. Passenger-side cowl, polished wiper arms, new windshield, polished and straightened windshield trim, trash guard, and NOS windshield seal. Driver-side cowl. First time seeing the medium green in the sunlight.